A fake bridge doesn’t need to break any code. It needs a page that looks like the one you meant to open, and one click from you: a signature or a deposit. Here is how fake bridge frontends and “bridge airdrops” take money, and what to check before anything leaves your wallet. Published for International Fraud Awareness Week 2026.
On the evening of November 10, 2026, people who opened across.to see the Across bridge interface they expected. It wasn’t Across. Attackers had taken over the domain through a social engineering attack on its registrar, Namecheap, and pointed it at a copy built to drain wallets. The bridge contracts kept working the whole time. Only users who signed permits or approvals on the fake page after 18:45 UTC were exposed, and GoPlus estimated their losses at close to $350,000 across six chains. Across got the domain back the next day with Namecheap’s help and told users: “All affected users will be made whole.”
Six weeks earlier, the same idea ran in reverse. Instead of a fake page in front of a real bridge, scammers built a fake network posing as GIWA, the Ethereum layer 2 that Upbit operator Dunamu is developing, and gave it a working bridge. GIWA’s mainnet had not launched. The DEX DYORSWAP initially treated the fake chain as the real one. By its own reconstruction, 1,335 addresses sent about 767.65 ETH into the bridge before the operators pulled out 766.25 ETH.
One case collected signatures. The other collected deposits. In both, money crossed in one direction, and nothing came back.
Two ways a fake bridge takes your money
A genuine bridge asks you for one of two things: permission to move a token, or the token itself. A fake bridge asks for exactly the same things, which is what makes it hard to spot from inside the page.
A signature. The page asks you to approve a token or sign a message. On the hijacked Across page, GoPlus found the drainer combining ordinary on-chain approvals with off-chain permit signatures, Permit2 among them. A permit costs nothing to sign and stays invisible until the attacker submits it. After that, the attacker can pull the approved tokens without another click from you. Newer request types widen the menu: Scam Sniffer flagged malicious EIP-7702 signatures after Ethereum’s Pectra upgrade, a kind of request that lets a contract act on behalf of your account. Our [approval phishing breakdown](LINK: Know the Scam, approval phishing) covers the mechanics in more depth.
A deposit. The page asks you to send funds, either to an address the attacker controls or into a bridge contract the attacker can rewrite. The fake GIWA bridge was the second kind. Its operators upgraded the bridge code and emptied it in a single transaction, about 13 hours after it went live. Deposits that arrived afterward landed in an empty bridge.
The signature route is the better measured of the two. Scam Sniffer counted $83.85 million lost to wallet-drainer phishing across 106,106 victims in 2025, down 83% from 2024. That figure covers signature-based drainers on EVM chains, so it describes one route, not both.
Where the fake page comes from
Lookalike domains. This is the cheapest version. One page tracked by PhishDestroy, app.across.to.en.v4[.]autos, carried the Across page title. Everything you recognize sits on the left. The domain that actually serves the page is the part at the end.
Hijacked real domains. This is the expensive version, and the one a bookmark doesn’t stop. In the Across case, the address bar showed the correct domain. About ten days earlier, attackers redirected at least twelve DeFi sites through the registrar Name.com to drainer copies.
Replies and DMs during an incident. When a protocol has a bad day, a second wave follows. Blockaid documented fake accounts posting lookalike “migrate” links under official posts within hours of several incidents this spring. A promise of compensation draws fake refund pages for the same reason.
A network everyone is waiting for. The fake GIWA chain worked because people expected a launch. It even used chain ID 9134, the identifier associated with GIWA’s planned mainnet, and that matching ID was enough to pass DYORSWAP’s first check.
Bridge airdrops. These borrow the credibility of real token launches. A fake LayerZero airdrop page drained the wallets of people who connected to claim, and the timing has only tightened since: when Backpack opened its token claim in March 2026, copycat phishing sites appeared within hours. Some claim pages dress a drainer signature up as a “claim.” Others ask for a small deposit to “activate” an allocation. The bait sometimes arrives as an unsolicited token in your wallet, named after the claim site. More on this pattern in our fake airdrops piece.
“A cross-chain transfer is invisible to you except for two things: the page and the prompt in your wallet. A fake bridge copies the first and counts on you skimming the second. The contracts can be flawless, and the money still leaves, because you decide in your browser before any chain is involved. So read the two addresses that matter: the one you are approving or paying, and the one that will receive the funds on the other side. Those are the parts of a bridge you can actually verify.”
Stefan Lauer, Head of Infrastructure, SimpleSwap
The check before you send
There are four checks, in this order. None of them needs you to read code.
1. Read the domain before the page. Open bridges from a bookmark or from links in the project’s own documentation, not from ads, replies, or DMs. Read the address from right to left: the domain that counts sits just before the first slash. This check catches lookalikes. It cannot catch a hijacked domain, which is why the remaining checks exist.
2. Match the contract to the docs. Established bridges publish where deposits go. Across lists its deposit contracts chain by chain. When your wallet shows the transaction, compare the full contract address it interacts with against that list. Checking only the first and last few characters is exactly what [address poisoning](LINK: Know the Scam, address poisoning) counts on. If a page tells you to send funds to an address you cannot find in any official source, stop there.
3. Read what the signature allows. An approval for the amount you are moving, given to the contract from step 2, is normal. An unlimited approval is not, and neither is a permit for a token you aren’t moving. If your wallet cannot decode a signature, reject it. A real bridge will simply ask again.
4. Find your own address on the target network. A bridge deposit includes instructions for where the funds should land, and Across’s documentation describes the destination as part of the deposit. Check that the recipient shown in the transaction details or on the confirmation screen is your own address, in the right format for the destination chain. If the destination network is new, find its launch announcement on the project’s own site before you bridge in. In the GIWA case, you found nothing, and GIWA’s public warning that its mainnet wasn’t live came only minutes before the fake bridge was emptied.
If all four pass, send a small amount first and watch it arrive on the destination chain’s explorer before you send the rest.
If you already signed or sent
Speed matters more than certainty here.
Revoke what you approved. Revoke.cash and Etherscan’s Token Approval Checker list active approvals. Each revocation is a small transaction on its own network.
Move funds if you signed a permit. If the attacker hasn’t submitted a permit yet, it won’t appear in any approval list, so moving the remaining balance to a fresh address is the safer option.
Keep the evidence. Save transaction hashes, the addresses involved, timestamps, and screenshots of the page. You will need them for any claim or report.
Ignore recovery offers. Refunds come through a project’s official channels, never through a DM or a form that asks for your seed phrase.
Where this meets your swap
SimpleSwap does a bridge’s job in practice: you send an asset on one network and receive the native asset on another, as we explain in “Bridge or Swap? Two Ways to Move Assets Between Chains”. That puts us inside the same threat model. Typing “is SimpleSwap safe” or “SimpleSwap scam” into a search bar before a first swap is a sensible reflex, and the checks above translate directly.
The domain. SimpleSwap’s only official domain is simpleswap.io.
The deposit address. A standard swap begins with a transfer you send yourself to a deposit address generated for your specific order on simpleswap.io. No documentation lists that address in advance, because it exists only for your order. Your anchor is the order page on the official site, with its order ID, where you can track the swap from deposit to delivery.
The recipient. The receiving address you entered appears in the order details. Check it, together with the network, before you send the deposit. Confirmed blockchain transactions cannot be reversed.
The counterparty. Registered users can run Address Check in the Customer Account. It screens a wallet address through third-party services and returns a risk level and any connections it finds. It does not replace the checks above and may not identify every issue, but it adds context about who you are dealing with.
SimpleSwap never asks for your seed phrase or private keys. The habits behind all of this are covered in our self-custody guide on CryptoSlate.
FAQ
What is a fake bridge scam?
A fake bridge scam is a page or network that imitates a cross-chain bridge to collect signatures or deposits. A signature lets a drainer move your tokens, while a deposit goes to an address or contract the scammer controls. Nothing arrives on the destination chain.
How can I tell bridge phishing from the real bridge?
Open the bridge from a bookmark or the project’s documentation, compare the contract in your wallet prompt with the addresses the project publishes, read what any signature allows, and confirm that the recipient on the target network is your own address.
Can a real bridge domain show a fake page?
Yes. In November 2026, attackers took over across.through its domain registrar and served a drainer copy while the bridge contracts kept working. A bookmark doesn't protect against that, which is why contract and signature checks matter.
What should I do if I signed something on a fake bridge?
Revoke approvals with a tool such as Revoke.cash, move remaining funds to a new address if you signed a permit, save transaction hashes and screenshots, and follow refund instructions only from the project’s official channels.
Is SimpleSwap safe to use for cross-chain swaps?
SimpleSwap is a self-custodial multi-source swap aggregator operating since 2018. It keeps no long-term user balances: each swap is a single, time-bounded transaction from a wallet you own to a wallet you own. Your part is to check that you are on simpleswap.io and that the receiving address and network in your order are correct. SimpleSwap never asks for your seed phrase or private keys.
Why do some people search “SimpleSwap scam”?
People use the word “scam” for very different experiences, from an order paused for a compliance check to a copied website. If your order is paused, contact support through simpleswap.io with your order ID. KYC may be required for transaction security and compliance. If any page asked for your seed phrase or private keys, it was not SimpleSwap.
This article is for educational purposes only and is not financial or investment advice. Tools and companies named here are examples rather than endorsements. SimpleSwap’s only official domain is simpleswap.io.