Tools you'll ever need:

- knife, scraper, squeegee, cold card, 

- blue max, slammer, bulldozer (for sedans), screw drivers(depending on vehicle), measuring tape, spray bottle, shampoo (best is Johnson - Johnson) 

👣👣👣🦿🦿🦿🦵🏽🦵🏻🦵🏻🦵🏼🦵🏿🦵🏽👌🏾👌🏾👌🏻👌🏻👌🏼👌🏾👌🏿👌🏽

🚖🚘🛸🚟🚠🚡🏢🏬🏥🏩🏫

👆🏻☝🏾These emojis(vehicles and buildings) rep the versatility of tint

Phase A - Panels(5 mins)

Remove door panels, usually remove door handle screws(newer vehicles). Then pop open the top, in order to remove the door moulding.

Some vehicles you may have to remove entire panels

Phase B - Cut film (5 mins)

You can use windscreen at own discretion.

Measure windows using tape, usually ranges around 0.80m(width) and 0.48m(height) for front passengers windows

0.70m(width) and 0.43m(height) for rear passengers windows

1.1m(width) and 0.48m(height) for rear window

☔🌥️🌤️☀️☀️☀️🌄🌅🌌🌌🌑🌒🌓🌔🌕🌖🌗🌘

🐾🐾🐾🚗🚐🚚🚛🚜🚒🚑🚓🚕

Phase C - installation (110 mins)

Spray the windows with water

Using the scraper, remove excess dirts

Squeegee out the water

Spray the windows and peel the film,

Also spray the film for mobility in application

Then apply to the window

Using cold card, push out water at the corners and midpoint to limit movement

Then cut using blade excess protruding window shape

Using cold card, push out all the water

Spray the windows

Then with blue max, push the water while applying a little pressure for the glue to stick on the windows

Then using slammer, push the edges where blue max can't reach

There you go champ 💪🏼💪🏽💪🏻💪🏾👍🏽

You have successfully done your tint🎉🎉🎉🎉🤯🤯🌟

I couldn't insert more images, it keeps returning errors, I will keep trying to edit... Should I be afforded the opportunity...